Locations

Strategic locations with high quality production facilities and machinery

Mongstad

WellConnection Mongstad AS is located at the main supply base for the oil and gas industry on the Norwegian continental shelf , Mongstadbase - located approximately 55 minutes from Bergen.


This gives us a very strategic location in relation to offshore installations. Materials that have a need for service and maintenance are delivered directly from the boat to our facilities on the supply base. This ensures very fast response time and a variety of logistical advantages.
 
WellConnection Mongstad has a total area of 160.000m2 area. 80.000 m2 is used for outdoor storage, workshop and administration buildings. The remaining 80.000m2 is available for future expansion.
 
  • Workshop: 6.200 m2
  • Office: 1.300 m2
  • Outdoor area: 74.000 m2
  • Further available area : 80.000 m2
  • Total area: 154.000 m2
 

Cleaning system for pipes

• High-pressure cleaning up to 1400 bar inside and outside.
• Dimensions: 2 3/8 "to 20" R2 and R3
 

TTS

• Two parallel inspection area for Drill Pipe. Each is 30 meters long.
• Three lathes for removing Hardbanding
• Two (four if needed) lathes for threading (Recut) (2 "to 10" OD)
• Four welding stations Hardbanding
• Automated handling drill pipes from avstropping to finish repairing.
 

Storage of drill pipe

• 35.000 m2 outdoor storage area.
• Four trucks, including a combi lift.
 

Mechanical workshop

• Area 24 x 30 meters.
• 3 cranes 16/16 mt.
• 1 helpline pulling machine.
• 1 pressure washer 1200 bar.
• 1 pressure washer 2500 bar.
• 2 pressure washer with steam 190 bar.
• 1 share sinks.

Welding shop

• Area 24 x 30 meters.
• 1 overhead crane 8.25 tons.
• 2 heat treatment units.
• 3 TIG welder.
• 5 MIG / MAG welding machine.
• Plasma welding for icing up.

 
Machine shop

• Area 24 x 48 meters.
• 1 overhead crane 32/8 tons.
• 5 CNC lathe 2 "- 20"
• 1 CNC drilling works.
• 1 manual lathes.
• 1 manual drill press.
• 1 torquemaskin 100,000 ft.lbs
• 1 testpit 3,5x3,5 meters - 6 meters deep.
 

Pipe inspection workshop (at Mongstadbase)

• 975 m2
• Used mostly for inspection of Tubing & Casing and Screens.
• Also used VTI inspections of Drill Pipe and assembly and mating of RFID chips.
 

WellConnection

WellConnection Group is the leading company within inspection, maintenance and repair services for drilling and subsea equipment on the Norwegian Continental Shelf. 

Contact us

WellConnection Group AS
Hamrasletta 9
4056 Tananger, Norway
Tel: +47 51 64 48 00
post@wellconnection.no

SOCIAL MEDIA